Check these top 54 Samsung Galaxy S22 Ultra tips

The Galaxy S22 Ultra is yet another flagship performer from Samsung, offering a variety of promising specs. Its massive internal storage, 12GB RAM, great cameras and a powerful battery lets you enjoy seamless operations throughout the day. Moreover, Samsung has also incorporated an on-screen fingerprint sensor within.

Samsung Galaxy S22 Ultra flaunts a 6.8 inches Dynamic AMOLED screen that gets a resolution of 1440 x 3088 pixels and a pixel density of 501ppi. Samsung has provided a quad-camera setup on the backside combining a 108MP f/1.8 Primary Camera, a 12MP f/2.2 Ultra Wide Angle Camera, a 10MP f/2.4 Telephoto Camera and a 10MP f/4.9 Camera. On the front side, the brand has provided a 40MP f/2.2 Primary Camera that clicks selfies with great detail.

Samsung Galaxy S22 Ultra is equipped with 256GB of non-expandable internal storage. For connection purposes, it supports 5G, 4G VoLTE, Wi-Fi 802.11, b/g/n, A-GPS, Glonass, Bluetooth v5.2 and Mobile Hotspot.

In this article, we are going to discuss the top 54 tips and tricks of the Galaxy S22 Ultra.

Hard Reset

Hard Reset

Method:

• Start by pressing the Power key + Volume Down and select the Power off option.
• Connect your phone to the computer by the Type C cable and push Volume Up and Power buttons at the same time.
• Let go of all buttons when the SAMSUNG logo appears and wait till the Recovery mode menu pops up.
• Now select Wipe data/factory reset by using the Volume keys to navigate and the Power button to accept it.
• Then go to Factory data reset by using the same buttons as before.
• Finally, select Reboot system now by using the Power button.
• Good job! You performed a hard reset operation.

Factory Reset

Method:

• First of all, go to Main Menu and open the Settings app.
• Now select the General management tab.
• Then choose Reset and Factory data reset.
• In the end, tap on the Reset button and Delete all.
• Well done! All your data will be removed during the whole operation.

Soft Reset

Method:

• Firstly, press the Volume Down and Power button for a few seconds to expand the power options.
• After that tap on the Power off button.
• Then confirm by the Power off one more time.
• Now wait for a short while and switch on the device by pushing the Power key.
• Success

Codes

• *#06# displays the IMEI and Serial Number.
• *#0*# Test Menu – in this Test Menu you can test most futures your SAMSUNG Galaxy S22 Ultra 5G has, like LCD Display, Touch, LED light, Front and Back Cameras and much more.
• *#0228# Battery Status – here you have every information about SAMSUNG Galaxy S22 Ultra 5G battery.
• *#0808# USB Settings – by this menu, you can change the way your SAMSUNG Galaxy S22 Ultra 5G will be recognized by the PC/Laptop when you are connected with USB cable. Modes like Mass Storage, MPT, ADB, etc.
• *#1234# Firmware version – you can check here your SAMSUNG Galaxy S22 Ultra 5G Firmware Version and Model Name.

Hidden Modes

Bootloader Mode

• At first, connect the Type C cable with your smartphone and the computer or laptop.
• Then press Volume Down + Power button for a couple of seconds.
• When the screen lights is off, hold down the Volume Up and Power key for a few seconds.
• Let go of both buttons when the SAMSUNG logo appears.
• Now use the Volume keys to select Reboot to bootloader and confirm with the Power button.
• Excellent! Bootloader Mode should be on the screen.

Download Mode

What is Download Mode?

Download mode is a hidden and advanced function. By using this secret menu you can also read a couple of useful information like FRP status, model details, or system data. When the SAMSUNG Galaxy S22 Ultra 5G will access the Download mode, the system will use the external sources instead of the stock bootloader, so as a result, you will be able to replace the ROM in that mode. That’s why it’s also used in the root process.

Method:

• At the start, press the Power key and Volume Down for a few seconds and select the Power off option.
• Now connect the device to the computer with the Type C cable and hold down Volume Up + Volume Down.
• Let go of all buttons when the SAMSUNG logo appears.
• Great work! Your mobile will be in Download Mode.

Emergency Mode

1st Method:

• Hold the Power button for a few seconds till a menu appears on your screen, and choose the Emergency mode.
• Accept terms and conditions and click Agree.
• Tap on Turn on.
• Swipe up on your screen to use Emergency mode.
• To turn off emergency mode tap on three dots in the top right corner of your screen and select Turn off Emergency Mode.

2nd Method:

• Start with unlocking your phone and opening the Settings app
• In Settings go to Safety and emergency tab and click on Emergency mode.
• Tap on the switch to turn the Emergency mode on.

Recovery Mode

What is Recovery Mode?

Recovery mode is a menu with a lot of useful functions. Depending on the version, modes will be different. In this mode, you can erase all data from your SAMSUNG Galaxy S22 Ultra 5G or only wipe a cache. You can turn on Fastboot mode or Bootloader mode from this menu if it is available. Some device brands have custom Recovery modes, but the principle of operation is the same or very similar.

Method:

• Firstly, connect the Type C cable from the computer to your mobile and press the Volume Down + Power key for a few moments to switch off the phone.
• Now hold down the Volume Up and Power button for a short while.
• When the SAMSUNG logo appears, let go of all held keys.
• Perfect! Your smartphone will be in Recovery mode.
• Use the Volume keys to scroll down and the Power button to confirm that.

Safe Mode

What is Safe Mode?

Safe mode is a special function on Android based OS which can activate SAMSUNG Galaxy S22 Ultra 5G with turned off non-system apps. It helps when some programs have bad effect on system performance. By using Safe mode, you can detect applications with viruses and delete them. This mode block malware and turn on SAMSUNG Galaxy S22 Ultra 5G correctly.

Method:

• At start, press Volume Down + Power key to expand the power options list.
• Then tap and hold Power off option.
• From the menu tap on the Safe mode icon.
• The SAMSUNG Galaxy S22 Ultra 5G will be rebooted into the Safe mode.
• Excellent!

Simple Mode

• Start with unlocking your phone and opening the Settings app
• In Settings go to Display Tab and find Easy mode.
• Tap the switch to turn on Easy mode.
• Done! Your device is now in Easy mode.

Reset Options

Reset Accessibility Settings

• Start with unlocking your phone and opening the Settings app
• In Settings go to the General management tab and then tap on Reset.
• Now tap on Reset accessibility settings.
• Tap on Reset settings and confirm by tapping Reset.
• Done!

Reset Apps

• Start with unlocking your phone and opening the Settings app
• In Settings open the Apps tab.
• Now tap on three dots and then Reset app preferences.
• Confirm by tapping on Reset.
• Done!

Reset Camera

• Start with opening your Camera application and tap on the settings icon in the top left corner.
• Now tap on Reset settings and confirm with Reset.
• Done!

Reset Network Settings

• At start, go to Main Menu and Settings app.
• After that open General management tab.
• Then select Reset and Reset network settings option.
• Now choose Reset settings and tap on Reset button.
• Amazing job!

Best Features

Add Face Unlock

• Start with unlocking your phone and opening the Settings app
• In Settings go to the Biometrics and security tab.
• Now you have to tap on the Face recognition option and press Continue.
• If you don’t have a secure screen lock set, you will have to create it. You can choose Pattern, PIN, or Password.
• As an example, we chose a pattern.
• Now you have to draw your pattern again.
• Now phone will register your face.
• Choose if you want to stay on the lock screen until swipe or not and press Done.
• That’s all!

Add Fingerprint

• Start with unlocking your phone and opening the Settings app
• In Settings go to the Biometrics and security tab.
• Now tap on Fingerprints.
• Press Continue.
• If you don’t have any secure screen lock you have to set it as a backup for Fingerprint. You can choose between Pattern, PIN, and Password.
• For example, we will create a pattern.
• Draw the pattern again to confirm it.
• Press Pattern set as screen lock type.
• Now start scanning your fingerprint by putting your fingertip on a scanner. Then confirm with the Done button.
• You can backup your pattern.
• Done! Your fingerprint has been added.

Add Password

• Start with unlocking your phone and opening the Settings app
• In Settings go to the Lock screen tab.
• Now you have to tap on the Screen lock type.
• Here you can choose the type of screen lock. We will choose Pattern as an example.
• Draw your Pattern.
• Draw the pattern again to confirm.
• Click Done.
• Here you can back up your pattern.
• Done!

Block Number

• Start with opening the Phone dialer app from your home screen.
• Tap on three dots in the top right corner of your screen and select Settings.
• Now go to Block numbers.
• Enter the number you want to block in Add phone number box.
• Tap plus icon to add a number to the block list.
• Done! The number has been blocked.

Change Language

• Start with unlocking your phone and opening the Settings app
• Now in settings find the General management tab.
• Click on Language.
• Tap on Add Language.
• Find your language on the list.
• Click set as default.
• Done! The language of your SAMSUNG Galaxy S22 Ultra 5G has been changed.

Change Wallpaper

• Start with unlocking your phone and opening the Settings app
• In Settings go to Wallpaper and Style tab.
• Now tap on My wallpapers.
• From the list choose a wallpaper that you like and choose if you want to set it on the home screen, lock screen, or both.
• Tap on Set on the Home screen to confirm.
• Now you can choose a color palette, and confirm by clicking Apply.
• Done! The wallpaper has been changed.

Developer Options

• Start with unlocking your phone and opening the Settings app
• In the Settings app find the About phone tab.
• Now go to Software information and find the build number.
• Tap on Build number several times until Developer mode has been enabled and appears on the bottom of your screen.
• Now in the settings app Developer options tab will appear.
• Done! You are now in Developer mode.

Do Not Disturb Mode

1st Method:

• Start with unlocking your phone and opening the Settings app.
• In Settings go to the Notifications tab and find Do not Disturb.
• Switch Do not disturb on.
• Done! Your phone is now in Do not disturb mode.

2nd Method:

• Start with unlocking your phone and opening the Settings app.
• Swipe down on your screen to open the top menu and find the Do not disturb icon.
• Done!

Portable Hotspot

1st Method:

• Start with unlocking your phone and opening the Settings app
• In Settings go to the Connections tab, and find Mobile Hotspot and Tethering.
• Tap on Mobile Hotspot.
• Click on Configure to change the settings of your Hotspot.
• Here you can change the Name and Password of your hotspot.
• To turn on your Hotspot change the Switch to on in the top right corner.
• Done! Your Hotspot is now active.

2nd Method:

• Start with unlocking your phone and opening the Settings app
• Swipe down on your screen to open the upper menu and find the Mobile Hotspot icon.
• Tap on this icon to turn on your Hotspot.
• Done!

Power Saving Mode

1st Method:

• Start with unlocking your phone and opening the Settings app
• In Settings find Battery and device care and tap on Learning usage patterns.
• Tap on the switch to activate Power saving mode.
• Done! Your SAMSUNG Galaxy S22 Ultra 5G is now in Power saving mode.

2nd Method:

• Start with unlocking your phone and opening the Settings app
• Swipe from the top of your screen to open the upper menu and find the Power saving icon.
• Done!

Unknown Sources

• Start with unlocking your phone and opening the Settings app
• In Settings go to Biometrics and security tab and then Install unknown apps.
• Select the source of apps that you want to install.
• Done! This source is now allowed to install apps.

Virus Scan

• Start with unlocking your phone and opening the Settings app.
• In Settings go to the Biometrics and security tab and then find Google Play Protect.
• Now tap Scan and wait for the scanning process to finish.
• Done! Your SAMSUNG Galaxy S22 Ultra 5G has been scanned for viruses!

Airplane Mode

1st Method:

• Start with unlocking your phone and opening the Settings app
• In Settings go to the Connections tab.
• Find the Flight mode switch and activate it.
• Done! Flight mode is now active.

2nd Method:

• Unlock your SAMSUNG Galaxy S22 Ultra 5G.
• Swipe down to expand the upper menu and tap on the Flight mode icon.
• Flight mode is now active!

Change Carrier

• Start with unlocking your phone and opening the Settings app
• Now go to the Connections tab.
• Tap on Mobile networks and then on Network operators.
• Uncheck Select automatically and tap Ok.
• Done! From this list, you can manually choose a carrier.

Dark Mode

1st Method:

• Start with unlocking your phone and opening the Settings app
• In Settings find the Display tab.
• Choose a dark mode.
• Done! Your phone is now in Dark mode.

2nd Method:

• Swipe down from the top of your screen to open the upper menu and find the Dark mode icon.
• After tapping this icon your phone will be set to Dark mode.
• Done!

Emergency Call

• Swipe up on your Lock screen.
• Tap on Emergency call.
• Done!

Emergency Information

• Start with unlocking your phone and opening the Settings app.
• In Settings go to Safety and Emergency and tap on Medical Info.
• Tap on the pencil icon in the top right corner of your screen.
• Here you can edit your Medical info and then click Save.
• If you have saved some medical info it should look like this.
• To add emergency contacts go back to Safety and emergency and then tap on Emergency contacts.
• Click on the pencil icon to edit emergency contacts.
• Now tap on Add number.
• Select contacts you want to add as emergency contacts and then press Done.
• Now tap Save.
• To check your emergency info and contacts swipe upwards on your lock screen and click emergency call.
• Now tap on Medical info and your information should pop up on your screen.

Eye Saver Mode

1st Method:

• Start with unlocking your phone and opening the Settings app.
• In Settings go to the Display tab and find an Eye comfort shield.
• Tap on the switch to turn it on.
• Done! The Eye comfort shield is now on.

2nd Method:

• Swipe down on your screen to open the upper menu and find the Eye comfort shield icon.
• Tap on this icon to turn it on.
• Done!

IMEI Check

• Unlock your SAMSUNG Galaxy S22 Ultra 5G and open phone dailer app.
• Enter *#06# code into the field.
• Done! IMEI numbers of your phone are displayed on your screen.

Keyboard Language

• Start with unlocking your phone and opening the Settings app.
• In Settings go to the General management tab and find Samsung Keyboard settings.
• Tap on Languages and types and then on Manage input languages.
• Find the Language you want to add and select it.
• Now you added a second language to your keyboard.
• To write in another language tap on the globe icon on your keyboard.
• If you want to remove language go back to languages and types and then manage input languages.
• Now select the language you want to remove.
• Done! You removed a second language from your keyboard.

Record Screen

• Swipe down on your screen to open the upper menu.
• Find the Screen recorder icon and then tap Start recording.
• After a few seconds, your phone will start recording your screen.
• To stop recording press the square icon.

Remove Google Account

• Start with unlocking your phone and opening the Settings app
• In Settings go to Accounts and backup tab then tap on Manage Accounts.
• From the list select the account that you want to remove and then tap remove the account.
• Now tap on Remove account and confirm with OK.
• Done! Your account has been removed.

Reset All Settings

• Start with unlocking your phone and opening the Settings app
• In Settings find the General management tab and then go to Reset.
• Now tap on Reset all settings.
• Tap on Reset settings and confirm by tapping on Reset.
• Done!

Screenshot

1st Method:

• At first, choose the screen that you want to capture.
• Now push Volume Down + Power key for a few seconds.
• Great! Your screenshot will be in the Gallery.

2nd Method:

• Go to the Settings and Advanced features tab.
• HardReset.info: Then open the Motions and gestures.
• HardReset.info: Click on the Palm swipe to capture the slider.
• Now choose the screen to capture.
• To take a screenshot, swipe the edge of your palm from the left side of the screen to the right.
• Excellent! The screenshot should be in your Gallery.

Voice method by Bixby:

Thanks to the SAMSUNG Bixby assistant, you can take a screenshot using voice command.

• First of all, make sure the Voice wake-up is on.
• Select the screen that you want to save.
• Now say “Hi, Bixby”.
• Then say “Take a screenshot”.
• Perfect job! Your picture will be in the Gallery application.

Scroll Capture Option:

When you want to capture a larger part of a page or application, you can use Scroll Capture.

• Select the screen to keep.
• Now click Volume Down and Power button.
• Then tap on the Scroll Capture icon a few times.
• When you have all the content you want, stop tapping the icon.
• Amazing! Now you know how to use the Scroll Capture. Your screenshot will be in the Gallery.

Set Up Gmail

• Start with unlocking your phone.
• Then go to the Google folder and open Gmail app.
• Tap on Got it and then Add an email address.
• Choose your email service, we will choose Google.
• Enter your login and press Next.
• Enter your password and press Next.
• Now tap on I Agree and Accept.
• Done! Your Gmail has been set up.

Set Up Wi-Fi

• Start with unlocking your phone and opening the Settings app
• In Settings go to connections tab and then Wi-Fi.
• Turn Wi-Fi on and Find your Network.
• Enter your password and press connect.
• Done! You are now connected to a Wi-Fi network.

Turn On Data Roaming

• Start with unlocking your phone and opening the Settings app
• In Settings go to the Connections tab and go to Mobile networks.
• Tap on Data roaming.
• Select All network and then tap OK.
• Done! Data roaming is now active.

Update Software

• Start with unlocking your phone and opening the Settings app
• In Settings go to the Software tab.
• Then tap on Download and install, and wait while your device is checking for updates.
• Now confirm with the Download button and wait for the update to download.

Wipe Cache

• At first, connect the device with the computer by the USB Type C and push Volume Down + Power button to switch off your phone.
• Then press Volume Up and Power key for a short while.
• Let go of all buttons if you see the SAMSUNG logo.
• Now use Volume keys to select Wipe cache partition and confirm with the Power button.
• In the next step go to Yes option.
• At last, choose Reboot system now by using the Power button.
• Perfect job!

Insert SIM Card into

How to Insert a SIM Card Into SAMSUNG Galaxy S22 Ultra 5G

Inserting SIM Card is a crucial operation for smartphones. If you just bought SAMSUNG Galaxy S22 Ultra 5G you need to find the way to properly insert a SIM card and start using a mobile network connection. Let’s follow our steps and install SIM card into SAMSUNG Galaxy S22 Ultra 5G.

SAMSUNG Galaxy S22 Ultra 5G SIM Card Installation

• First of all, power off SAMSUNG Galaxy S22 Ultra 5G.
• Then locate the SIM card tray on your SAMSUNG Galaxy S22 Ultra 5G. You should recognize it by a small hole for the eject tool.
• Insert a SIM removal tool into the hole of the SIM card tray to release the tray. A paperclip or a pushpin can be used instead of a SIM removal tool if you don’t have one.
• Afterwards, pull the SIM card tray out of the SAMSUNG Galaxy S22 Ultra 5G.
• Set your SIM card into the tray. Then push the SIM tray back into the phone.
• Finally, you may turn on the SAMSUNG Galaxy S22 Ultra 5G and use mobile network conection.

The example of inserting SIM card tutorial. It should looks similar to SAMSUNG Galaxy S22 Ultra 5G insert SIM operation.

Factory Reset Protection

Bypass Google Verification

Necessary Tools and Drivers

• WiFi Network.
• Computer with Windows OS 7/8/10/11.
• USB cable.
• Special Samsung Drivers.
• Sam FRP Bypass Tool v1.4.

Removing Google Account Verification from SAMSUNG Galaxy S22 Ultra 5G

• To begin turn on the SAMSUNG Galaxy S22 Ultra 5G and connect to Wi-Fi network.
• Install special Samsung drivers if use Windows OS lower than windows 10.
• Turn off antivirus or add Sam FRP Bypass Tool v1.4 to the exception list.
• Download and unpack Sam FRP Bypass Tool v1.4 software.
• On phone on the Google account protection screen press the volume up and power buttons together.
• On the pop-up screen press the use button, to can enable talkback by pressing physical buttons.
• Tap again volume up + power button to enable talkback assistant.
• Write on the screen mirror L to open the voice command menu, on the show-up screen press while using the app button then the use voice commands button.
• Speak to SAMSUNG phone: open Google assistant
• Bixby Samsung voice assistant opens, use the volume up + power button to turn off talkback.

If you like our news and you want to be the first to get notifications of the latest news, then follow us on Twitter and Facebook page and join our Telegram channel. Also, you can follow us on Google News for regular updates.