OnePlus 10 Pro model leaked, Hasselblad post-photographic module is huge

According to previous news, Qualcomm will officially release the iterative product of Snapdragon 888-Snapdragon 8 Gen1 at the beginning of next month. Recently, various revelations about the chip and terminal products have continued to surface. At present, there are a large number of domestic mobile phone manufacturers that will try the first time. Within two months after the release of the chip, there will be a wave of new phones.

In addition to Xiaomi Mi 12, various news about the OnePlus 10 Pro has also emerged in recent times. Today, some netizens have exposed the metal template of the device. According to the picture, the OnePlus 10 Pro confirmed that it has adopted the previously exposed design, and the back uses a very large camera module, which contains four circular openings, which is expected to support at least three shots.

It should be noted that the rear camera module of the OnePlus 10 Pro is not placed in the upper left corner like the previous model. It is even more than the module placed in the center has been moved directly to the left. The whole arrangement is very strange, and even some netizens say This is going to kill obsessive-compulsive disorder.

Join RealMi Central on Telegram, Facebook & Twitter

According to the planning of the OnePlus 9 series, the OnePlus 10 Pro will at least be equipped with three main camera-level modules. Each camera will have a very large volume, and this shape may also be the last resort for internal stacking.

In addition, the OnePlus 10 Pro seems to have an integrated design similar to the Samsung S21. The rear camera module is completely integrated with the metal middle frame, which seems to be more sturdy.

According to previous reports, the OnePlus 10 Pro will use a 6.7-inch 2K AM OLED full screen on the front, with a refresh rate of 120Hz, and a built-in battery capacity of 5000mAh, which supports at least 60W fast charging power, which is worth looking forward to.

Leave a Comment